low end fuzz Posted July 7, 2006 Report Share Posted July 7, 2006 anything to be wary of? the coats of oil would be dry of course, but would it interfere with the oils properties? Quote Link to comment Share on other sites More sharing options...
Mickguard Posted July 7, 2006 Report Share Posted July 7, 2006 anything to be wary of? the coats of oil would be dry of course, but would it interfere with the oils properties? Didn't you ask this elsewhere? The tung oil mix I'm using (Le Tonkinois) is rated for marine applications. So if it can handle the open seas, it can handle a little bit of tap water. But like you read in the other thread, use the oil itself to wetsand between coats--no water. IThe final sanding is different, since you've given the oil time to cure, so in theory at least it's completely dry. On my test piece, I final sanded with water and that worked out just great. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.