S.Dodding Posted September 13, 2006 Report Share Posted September 13, 2006 Well it's been a year or so since the last building project, since then everything i'd done basically went into storage, and hasn't been looked at since. After recently motivating myself to start up again, I decided the neck I'd been building wasn't up to scratch... various little mistakes meant that i'd never really be satisfied with what I'd done so far. So, a new neck build, having learnt plenty of lessons from building the last neck (The main one being to check and double check everything before moving on!), hopefully this one will turn out nicely. This was the previous neck as it was before I stopped work on it The new one will be the same design as the previous neck, except with a Rosewood fretboard instead of a birdseye maple one. So far i've more or less just cut the fretboard to size, tomorrow i'll scarf the neck. Pictures to come once there's actually something to show! Quote Link to comment Share on other sites More sharing options...
Maurits Posted September 13, 2006 Report Share Posted September 13, 2006 That is a nice looking headstock on there. Are you also going for inlays? Quote Link to comment Share on other sites More sharing options...
S.Dodding Posted September 14, 2006 Author Report Share Posted September 14, 2006 I've not got any inlays planned for the fretboard no, just the usual side dots, nothing on the face of the board. I am going to be doing more elaborate things on future builds, however at the moment, this is pretty much going to be a straight replacement for the original neck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.