prauny Posted November 13, 2006 Report Share Posted November 13, 2006 Ok, i have three switches and three humbuckers. The plan is for each switch to control a pickup of its own (simple enough). I have no idea how to wire this up... Its one volume, one tone three switches (one of which is a coil splitter). The coil splitter will be wired to the bridge bucker. The pickups have five wires on them, green, white, red, and a black and braded wire which are soldered together. Any help would be appreciated. closer view of pickup wires http://i64.photobucket.com/albums/h185/pra...ll/Picture5.jpg Quote Link to comment Share on other sites More sharing options...
Desopolis Posted November 13, 2006 Report Share Posted November 13, 2006 are they all coil splitters or what are the functions of eatch switch? Quote Link to comment Share on other sites More sharing options...
prauny Posted November 13, 2006 Author Report Share Posted November 13, 2006 the two little red/brown switches are on/off, and the bigger black on is a splitter/off. Quote Link to comment Share on other sites More sharing options...
Robert_the_damned Posted November 13, 2006 Report Share Posted November 13, 2006 (edited) you'll want to wire them like this: Edited November 13, 2006 by Robert_the_damned Quote Link to comment Share on other sites More sharing options...
prauny Posted November 13, 2006 Author Report Share Posted November 13, 2006 Thats great Robert!!!! Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.