echoes Posted December 12, 2006 Report Share Posted December 12, 2006 i have this strat body, i know for a fact it isnt a fender, but id like to put a fender usa trem on it. so my question is... what exactly is going to need to be done to convert it? all help is extremely appreciated Quote Link to comment Share on other sites More sharing options...
Desopolis Posted December 12, 2006 Report Share Posted December 12, 2006 first, how many mounting screws? second, whats the width between them? go to www.guitarfetish.com they have the same thing there for cheaper Quote Link to comment Share on other sites More sharing options...
echoes Posted December 12, 2006 Author Report Share Posted December 12, 2006 yeah, i was planning on getting the wilkinson "upgrade" from them. anyway, theres 6 screws and i think its like 10.5mm between each one Quote Link to comment Share on other sites More sharing options...
echoes Posted December 13, 2006 Author Report Share Posted December 13, 2006 bump Quote Link to comment Share on other sites More sharing options...
Mattia Posted December 13, 2006 Report Share Posted December 13, 2006 plug the holes with wood, redrill. Quote Link to comment Share on other sites More sharing options...
another doug Posted December 13, 2006 Report Share Posted December 13, 2006 One word of advice: check that the string spacing on the new trem matches that on your existing trem. They are not all the same, and if you get a wider spacing, the E strings may be too close to the edge of the fretboard (from experience ) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.