themetalhankey Posted January 21, 2007 Report Share Posted January 21, 2007 Just checkin here... I don't have the part with me and I've got to finish this body with all holes drilled, plus its due soon. Quote Link to comment Share on other sites More sharing options...
johnsilver Posted January 22, 2007 Report Share Posted January 22, 2007 IMHO, cutting wood without having your part on hand is poor practice and a recipe for disaster. The switch I'm holding now will fit into a 1/2" hole. It will also fit into a 31/64" and a 15/32" hole. Your switch may vary. Quote Link to comment Share on other sites More sharing options...
Mickguard Posted January 22, 2007 Report Share Posted January 22, 2007 Just checkin here... I don't have the part with me and I've got to finish this body with all holes drilled, plus its due soon. I don't get it. You couldn't have just continued your other thread? Did you read the responses there? The information you need is already in that thread. Quote Link to comment Share on other sites More sharing options...
Doeringer Posted January 22, 2007 Report Share Posted January 22, 2007 (edited) Are you selling bodies without knowing what size this hole is normally? Good luck with that. Sorry, I just read your other post and found this to be a school project and it seems your answer was posted correctly above. Edited January 22, 2007 by Doeringer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.