StefanR Posted April 5, 2007 Report Share Posted April 5, 2007 anyone know the dimensions of the hole required to install a stratocaster style recessed jack plate? thanks in advance, Stefan Quote Link to comment Share on other sites More sharing options...
Bertbart Posted April 5, 2007 Report Share Posted April 5, 2007 Turn it upside down mark on tape where you want it. Then draw another line inboard of the outline approximately 3/16 of an inch. leave a tad more at either end. You can tell how much more to leave if you mark the screw holes as well. Take an exacto with a #11 blade an follow the inside line. Pull the tape plug off and route withing the confines of the tape you left. You may have to tweak it by routing a little more until the jack plate with the jack drops in. Quote Link to comment Share on other sites More sharing options...
Desopolis Posted April 6, 2007 Report Share Posted April 6, 2007 or trace it with a pencil, mark the screw holes and go from there... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.