cukaracha Posted June 1, 2007 Report Share Posted June 1, 2007 (edited) I'm just finished making a custom logo on a piece of transparency film (I followed the tutorial and used waterproof metallic markers, but without the Mod Podge). My question is, what type of glue should I use to glue it onto my guitar headstock thats been refinished (i used lacquer-based aerosol spray)? Edited June 1, 2007 by cukaracha Quote Link to comment Share on other sites More sharing options...
Acousticraft Posted June 5, 2007 Report Share Posted June 5, 2007 (edited) The first thought was contact adhesive but that will show through as it is a brown colour. I would probably be tempted to use a little clear epoxy to glue it on with as it want show. If you can mask neatly around your logo this will stop excess glue going over the headstock and remove the masking tape once the epoxy has solidified but don't leave it too long. Edited June 5, 2007 by Acousticraft Quote Link to comment Share on other sites More sharing options...
cukaracha Posted June 5, 2007 Author Report Share Posted June 5, 2007 yup. thats what i did when i was waiting for a reply and it worked great! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.