Jump to content

Where Find Parts For Bendmaster Deluxe Tremolo?


Recommended Posts

Got a Used "Bendmaster Deluxe" Tremolo Which I want to know if it is Complete.

Looking for a Tremolo Bar, Anchors and Bridge height Adjustment Screws for it.

I guess it might originally be for a Westone Guitar.

BendMDel.jpg

Heard that Floyd Rose Parts would fit on it, but my "Licence" trem bar won't.

I Found that the upper anchor cavity is larger than the lower, so it must need two Differently dimensioned Adjustment Screws

Edited by Metallion
Link to comment
Share on other sites

Got a Used "Bendmaster Deluxe" Tremolo Which I want to know if it is Complete.

Looking for a Tremolo Bar, Anchors and Bridge height Adjustment Screws for it.

I guess it might originally be for a Westone Guitar.

BendMDel.jpg

Heard that Floyd Rose Parts would fit on it, but my "Licence" trem bar won't.

I Found that the upper anchor cavity is larger than the lower, so it must need two Differently dimensioned Adjustment Screws

Is the bar a screw in type, or a push in?

Link to comment
Share on other sites

Is the bar a screw in type, or a push in?

A Screw-in. Seems to have a circa 0.5mm wider tread than Floyd, 8.8mm v/s 8.3mm.

The T-bar cavity has a 6mm inner diameter (14mm deep), 0.2mm too small for my Floyd "Licence" bar.

The Anchor grooves are ~12.2mm diam. at top groove, ~10.85mm lower groove, but the Studs are told to be the same on both posts.

Edited by Metallion
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...