richiekahn Posted June 18, 2013 Report Share Posted June 18, 2013 Hi PSW! I've read about you on the internet and all over other threads about sustainers and I love your work! I am about to start a project in adding a sustainer to my Les Paul Jr. It currently has a P-90 bridge pickup only and I am going to swag it out with a humbucker. I am not very experienced with circuitry - however I have been reading a variety of different schematics and my father understands them. I know that you have referred people over to the sustainer thread for requests such as mine, but I have read about the first hundred pages and am overwhelmed with the knowledge from there. I plan on building a fetzer/ruby circuit board, but I have been seeing people have issues in getting the two thinnest strings on their guitars to sustain or play harmonic sustained notes using the fetzer/ruby. I was wondering if you have a schematic of the circuit board you used for this beautiful tele guitar. Any help or input would be greatly appreciated! Another thing I was wondering about was how the harmonic effect is added into the circuitry. How? I know the DPDT switch turns it on off and how that is wired into it but is there any resistor/capacitor that controls it? Thanks a lot! I have attached the schematic I am planning to use for my build. Do you have any tweaks I should make on this schematic? Thanks so much! Richard Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.