Dingus420 Posted December 6, 2008 Report Share Posted December 6, 2008 hey im finally fed up with the sound that my jackson js-30 is capable of, so ive decided to take out the 2 stock pups and put a single humbucker that i bought for my current build in the bridge position, can anyone hook me up with some a wiring diagram i need to make this work with 1 vol and 1 tone knob... i guess i leave the 3 way switch out of the wiring? this is the first time ive done any guitar wiring so any help is appreciated Quote Link to comment Share on other sites More sharing options...
Keegan Posted December 7, 2008 Report Share Posted December 7, 2008 Either http://www.seymourduncan.com/support/wirin...1hum_1vol_1tone or http://www.seymourduncan.com/support/wirin...matic=1phat1v1t depending on if it's four conductor or two. You might consider putting a DPDT in place of the pickup selector switch, so that you can do this http://www.seymourduncan.com/support/wirin...p?schematic=ssp In that case it would be wired to the DPDT then the hot out would go from there to the volume. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.