otgordin Posted December 21, 2003 Report Share Posted December 21, 2003 I was looking at the copy-carver website, and they recomended this router. Am I just gonna tear it apart doing a body (even if I go a little at a time)? and for the price should i even care? -Vadim Quote Link to comment Share on other sites More sharing options...
otgordin Posted December 21, 2003 Author Report Share Posted December 21, 2003 I should probably add that yes, I am building a copy-carver so it will be possible to "shave" off relatively thin layers. Quote Link to comment Share on other sites More sharing options...
9of7 X 3of2 Posted December 21, 2003 Report Share Posted December 21, 2003 I'm not sure if you checked or not, but there is a very cool thread on the next page about the duplicarver. And I think your question is pre-answered there For 10 dollars, I cant see you getting a lot of use out of this before it dies. And the size of it makes me thinks it might lack enough power for clean crisp cuts. But for 10$ give it a try, and post how the thing worked for ya. Quote Link to comment Share on other sites More sharing options...
otgordin Posted December 21, 2003 Author Report Share Posted December 21, 2003 Is the thread on this board? Quote Link to comment Share on other sites More sharing options...
9of7 X 3of2 Posted December 21, 2003 Report Share Posted December 21, 2003 Yes, go to page 2 of "tools and shop talk" its the second topic from the top. Great info if your looking to get into this sort of thing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.