Jivin Posted February 28, 2004 Report Share Posted February 28, 2004 Hi, Im interested in doing a material finish on a guitar I have here, but since im fairly new to this, i'm after some really simple step-by-step clarification if you would be so kind So: 1. I strip the body of its existing finish down to bare wood 2. Cut out my stencil template of the body 3. Cut out my peice(s) of material 4. Paint the sides of the body and cavities the desired matching colour (?) 5. Put on the glue, spread it out evenly 6. Apply material, avoiding all bubbles ect. and slitting where necessary to releive pressure 7. Apply grain filler 8. Apply (im a poor boy ) burst matching colour on the edges 9. Apply clear coats ?? Comments and corrections and advice would be appreciated Thanks - Dan Quote Link to comment Share on other sites More sharing options...
Brian Posted February 28, 2004 Report Share Posted February 28, 2004 Hi Dan Yes that will work just fine If you want to skip the filler you can but it will require a few more layers of clearcoat to level out the surface. Quote Link to comment Share on other sites More sharing options...
Jivin Posted February 29, 2004 Author Report Share Posted February 29, 2004 Lovely! Thanks Brian, your a champ I'll try it at soon as I have the new body cut out (change of plans) - Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.