Astro2k
-
Posts
42 -
Joined
-
Last visited
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Everything posted by Astro2k
-
Thanks for your help I think I'll go with the plastic covers just do to the cheaper price Thanks This forum rocks for newbie guitarist like my self.
-
Hi I like the way a guitar looks with pickup covers on it, and thinking bout getting some but was wondering if they change your sound or decrease your output of your pickups? anyone added pickup covers and noticed a difference? I have High output pickups Mother buckers 21k out put. Thanks
-
the switch it has on the amp just has two wires to it a red and black, its a in out switch witch is what foot switch switch is correct? it would just be replacing one with the other.
-
well it has a switch in the front of the amp what I was thinking was just wiring to that switch to a 1/4in jack in the back then you plug a foot switch into it maybe opening up the foot switch making sure its wired same sounds like it should work right? Thanks
-
would useing a pickup cover decrease or interfere with sound of my pickups? such as these http://www.guitarpartsonline.com/product_i...products_id=232 Thanks.
-
Hi I have a Marshal mini stack and it dont have a foot switch to change channels (clean dist) so I was wondering if it would work to put a 1/4 in jack in the back of the amp wire it to the switch and buy a footswitch for it would this work? sounds like it should. thanks for your help.
-
Hi I have a wiring Problem I have two humbuckers I put on/off switch for each pickup. but I'm using one Volume pot I can only get one pickup to work at a time. if I wire both up to volume pot the bridge pickup dont work if i unhook the neck pickup the bridge pickup works. basically it works if I only have one pickup wired to pot. can you hookup two pickup outputs to the same lug on vol pot? anyone have an idea what I'm doing wrong? thanks
-
Hi I got a locking nut for my Guitar and it sits to low strings they touch first fret. are there shims or something to raise it up or should i leave the regular nut in and put the locking nut behind it? I tried it that way it wasn't to low but don't look right never seen another guitar like that. Thanks
-
yeah planning on only one volume for both pickups, I've never seen a guitar with two Volume controls well les pauls do I think.
-
Hi I am putting together a Guitar and it has two humbuckers I want the bridge to just be Humbucker and I want the neck pickup to be coil tapped so i can use it as Humbucker or single coil I only have a volume no tone pot anyone help me with the wiring? and what switches I need. a 3 way for neck and on off for bridge? Thanks
-
It's an on on on switch says right on the side of it.
-
Ok I wired pickup one to lug 6-3 output to pot 5-2 and pickup two to 4-1. I don't get no out put in center sounds like I get both pickups when its over lug 6-3 and one pickup over 4-1. It's a on on on switch anyone have any idea what i did wrong? thanks :D
-
the switch i have is on on on and after I posted and read replies I realized it would make more sense to have it wired pickup 1 pickup 2 and both no off position I want volume no tone pot. I'm useing a 500k pot for volume with 1000pF/220K across two of the lugs on the volume pot. Thanks hope this helps
-
Thanks for all your help you guys are great!
-
Cool thanks just one more question if i wanted to make the off postion run both pickups is that possible? Thanks for your help!
-
I have an older Marshall Microstack not the tiny one but anyway are there any amp repair shops and if so would it be cost wise to get it fixed or buy new amp? it powers up led lites up just get no output from it. thanks for your help.
-
Hi I have two humbuckers I want to wire it up with No tone just Volume and a 3 way mini toggle that would select pickup 1 pickup 2 and off is there anyway to do this? and if so could someone do a diagram? Thanks a million. :D