Biblical

Im having trouble with my Marshall A cab, the problem that seems to be distressing me is that each time i insert the speaker cable into the stereo input it works yet each time i then insert the speaker cable into the mono output it disinclines to work.

There was a lose cable in it that i have resoldered so that it is intact, yet the aformentioned problem still occurs. It might be a faulty switch but im still not positive it is. Any help anyone?

it is true bypass

I took the switch out and start checking what was the problem and pushing it down before it properly clicked cut it out, so im going to get a new switch soon and see if that is the problem, thanks for all the help anyway, ta

I recently brought a 535Q wah wah from America 2 months ago, now im back in England it seems to be doing this weird thing where 4 times out of 10 when I press the wah wah down it works, then when I press it to stop and take my foot off the wah wah everything goes silent until i have to push the pedal forward a little and regain the signal.

Any ideas on how to stop it?

its real chrome, some body posted up a paint that can get the same effect, try searching

violins also need high action, do fretless guitars

sombody told me that fretless guitars dont really work, have you tried one yet, if they do work go ahead

i have the line 6 spider as a practice amp, its really good

k, what about the slanted piece though

i have this picture booklet from prs in my local music store which was free, it had all the guitars in it and on every other page it had all these pictures of the guitars being built.

one picture shows a guitar getting ready for carving with a top which was nearly an inch high (is this normal for them) and one of the others had a picture of man chiselling the top with the lines for where to chisell on it (good news for me) but the top is around an inch high at the back to about one centermetre at the neck end making it really slanted (is this right)

i will post pics in a bit

yep tis signed by him, he had another in black and white didnt he

hello giveusabeer, aint seen you for ages,

yep he sure is, lots and lots of posts in the electronics section, hope he does it

your probably asked this alot put i searched and couldnt find anything,

many guitars i see have pearl of somthing similar around the edge of them, i was wondering how this is done.

this is probably a complete newb of a question, sorry

what are the vintage bass like, also where can i get them in england

Can you put a systen on the guitar where you flick a switch and the pitch drops like it has been downtuned?..I know there is a simulator on pedals but can it be put onboard a guitar?

you mean like on a whammy reissue,

it can be done, expensive though

it has a reverb and channel change

oh well never mind, nam brings up same image,

i heard about them in guitar world i think. they have a moniter system one that balances all the sounds onstage, looks cool but i dont have £2300

this questions really for anybody good with electronics or amps.

on my dsl there are two channels operated by foot switch as you probably know, they can also be changed from clean to crunch and from distortion to lead sound via a switch on each channel on the amp.

i was wondering if there is any way to make a pedal for the amp where i can change the settings without having to run up to the switch mid gig.

Oli

for pcb layout, all go to www.pcb-pool.com and download target

get a baby food jar
fill it half with wd-40 and half with rubbing alcohol and shake. get a cloth
dab it in and go over your strings, stops the acid from your fingers corroding thm and makes the last longer

well i get all my prices low because i know a guy who does them he did it for me for about £10-15 i think, i think its normally more than that, im not sure though

sound control are shite, where i live they are complete bastards and very moody, i go to PMT now, they are much nicer

Gibson now use Gorrilla glue, try that stuff its rrrreeealllllyyy strong