Im having trouble with my Marshall A cab, the problem that seems to be distressing me is that each time i insert the speaker cable into the stereo input it works yet each time i then insert the speaker cable into the mono output it disinclines to work.
There was a lose cable in it that i have resoldered so that it is intact, yet the aformentioned problem still occurs. It might be a faulty switch but im still not positive it is. Any help anyone?
I took the switch out and start checking what was the problem and pushing it down before it properly clicked cut it out, so im going to get a new switch soon and see if that is the problem, thanks for all the help anyway, ta
I recently brought a 535Q wah wah from America 2 months ago, now im back in England it seems to be doing this weird thing where 4 times out of 10 when I press the wah wah down it works, then when I press it to stop and take my foot off the wah wah everything goes silent until i have to push the pedal forward a little and regain the signal.
Any ideas on how to stop it?
i have this picture booklet from prs in my local music store which was free, it had all the guitars in it and on every other page it had all these pictures of the guitars being built.
one picture shows a guitar getting ready for carving with a top which was nearly an inch high (is this normal for them) and one of the others had a picture of man chiselling the top with the lines for where to chisell on it (good news for me) but the top is around an inch high at the back to about one centermetre at the neck end making it really slanted (is this right)
i will post pics in a bit
your probably asked this alot put i searched and couldnt find anything,
many guitars i see have pearl of somthing similar around the edge of them, i was wondering how this is done.
this is probably a complete newb of a question, sorry