outtahear

The mother of all relicing vids-Dan repros' a 50s' blond Tele right afore yer eyes-fingerboard wear, stains+all! Also, touchups, graining, and other helpful tips. 1995 version, don't know if there's a newer one?? Grab it here......

Rare example of "Servicemans Fender" FORGERIES made in the mysterious east to flog to G.I.s during the, uh.."Unpleasantness". Made of mahogany, neck LONG gone, routed for Humbuckers. Hardware nicely rusted/scratched (Not relic'ed-it's OLD) and "engraved" (Poorly)Fender/pat # 44555. Hard as hell to find redheadedstepchild of the vintage guitar trade,good conversation piece, or slap a shorty neck and go-it IS 30+ year old mahogany.... (Priced a new jag body?? Yow.....) Grab it all for $150, shipping included! e-mail me @ bfegyptguitarsATaolDOTcom...

wide, med thick, w/CHEAPASS tuners (might be deilled for diecasts though??) refretted, 16"(?) radius. Lightly flamed maple, Nitrocellulose lacquer finish. Grab it for less than the re-fret...$50 +$12 shipped ConUs!!

http://img.photobucket.com/albums/v70/outtahear/DSC02228.jpg

contact me @ bfegyptguitarsATaolDOTcom. Thanks.

Please re-read the pic posting rules

FS Pro built, top shelf parts (Fender, Fralin custom Broadcaster wind, warmouth neck, BF EGYPT Guitars body (1piece light ash) MANN-MADE angled saddles Vintage Fender dip switch tip, milled jacl cup, and neck pickup cover. THIN nitrocellulose finish. No caseBLOWOUT PRICED $750. Off to E-bay SUN...

Take both for $30+$5 shipping....

Digital multimeter-accurate enough to match components+bias your amp tough enough your gigs, cheap enough to lend to your bassist! $25+$5 shipping, ConUS. Book-"GUIDE TO GUITAR AND AMP MAINTENENCE" Covers everything from cleaning, tuning, and setting up your guitar, to cleaning, and 3 different ways of biasing your (tube) amp. $12+ $4 shipping ConUs.

$35 -but you gotta move......

.

Nice meaty neck, nice wood(15+ years old) play your cards right, you could have this for less $ than the price of a few Warmouth options....This-a-way........

That's a steal-was built for a guy who backed out, so it's new. Nice "swirl", and classic rock tone to the bone-from the KT-66 output tubes. Handbuilt, hardwired just like an oldster, just $2,000+ less. Run before I go back.....

If you're in the Los Angeles area, (Black Market Music) $1700 will get you this...(white one..)

You don't bend masonite, and neither did Danelectro. Straight pine/poplar offcuts STAPLED together, covered in masonite (glued front+back) cut to shape on a pin router. The "side material" was vinyl-ALLPARTS carries(carried?) it.

er, you mean nitro?? Yeah-shouldn't be a problem-but as always, TEST ON SCRAP! That said, Deft seems about the least yellowing nitro I've used..if you're looking for something that will NEVER yellow, use acrylic lacquer(start to finish-do not spray acrylic lacquer over nitro..)

Clearcoat that badboy, and rust up your hardware-go manstyle!

er, this one

We have been using a SONY dsc p-50 as shop cam for 3 years now lotta bang for the buck. Good for close-ups, like this VOM labeled Mullard, or for "no look" shots using the back screen to compose, like this shot from Starbucks 1 block south of UCLA>>>

E-mailed you 2 weeks ago-whassup??