Jump to content

loran

Members
 View Profile  See their activity

  • Posts

    5

  • Joined

  • Last visited

 Content Type 

Everything posted by loran

  1. loran
    top of page 4 on the pdf
  2. loran
    this is a regular sustainer kit here is what I have: http://www.fernandesguitars.com/manuals/FSK101.pdf
  3. loran
    I ve been contacted fernandes 1 week ago and they reply this: Unfortunately we don’t have a diagram of the wiring for the specific system you are attempting to install. In order to separate the driver humbucking signal from the sustainer you will need an additional switch to isolate the mini humbucker. nothing at manic music vai use a fernandes sustainer on : flo, flo 2 ,fretless of his tripleneck jem , and the new bad h (the mirror one) I ve picts of each closiest to see "sustainer tm" here the url , for the classic wiring of a sustainer. http://www.fernandesguitars.com/manuals/FSK401.pdf http://www.fernandesguitars.com/manuals/FSK401.zip
  4. loran
    no vai have only a driver in the neck position on FLO. the white cover with no hole next is a dummy.
  5. loran
    hi everyone I ve just purchased a sustainer fsk 401 kit. I would like to put it in an Ibanez jem 7vwh which has a H/S/H configuration with split on 2 and 4 position and replace the driver sound by a mini humbucking to still have the same conbination. H/S/H configuration 1 bridgeHum 2 bridgeHum split + middleSingle 3 middle Single 4neckHum + middleSingle 5neckHum A mini humbucking is added close to the driver in order to replace the driver sound in position 4 & 5 Of course when sustainer is on the bridge pickup is automatically selected. (the mini humbucker must replace the sound of the driver and be spilttable . Standart 5 way H/S/H configuration and the driver is only used to project magnetic pulses in conjonction with the bridge humbucker. Fernands site doesnt have a wiring. does anybody can help me?
×
×
  • Create New...