the fool on the hill

I have got a new tremolo for my guitar and the screw mounting hole spacing`s are different, would i be able to drill a few new holes and fit the tremolo? I would be able to get the first 4 screws in the original hole`s and have to drill holes for the 5th and 6th screws (5th=1mm and 6th=2mm off center) or would the 6th string be too close to the edge of the fretboard?

From the threads i did read i think it should work. As i will get a photoprint shop to print the picture onto paper for me, So it should be good paper and good ink thats used. Also i will be keeping track of my progress and logging it on a website for future reference

Hey Brian, Thanks for the tip thomasteven, I did do a search but it didnt come up with much and the one post i found usefull didn`t have a replie to whether it actually worked or not. I did read the tutorial on a fabric finish, but i will search before i ask anything.

I have a plan to get a picture on my next project, But dont know if it will work out. THE PLAN 1. strip the guitar and paint it black. 2. print off picture to good quility paper and use spray glue to stick the picture to the guitar. 3. Lightly fade the edges of the picture with paint. 4. lacquer over the guitar to finish. Has anyone tried this before? Would the paper bubble? Will the laquer take to the paper? + = Photoshop preview

Thanks for the like I have solved the problem with a bit of "trial and error" Now time for a full set-up.

I need to wire my pick ups to a 3 way switch. From the pickups there is a white and a bare wire, On the 3 way there is 4 lugs (middle 2 for the volume pot). I don`t know what to solder and where to solder. Any help appreciated