vwall

Heres what left:

1995 Ibanez RG 570 Black Pearl

Made in Japan!

Beautiful black pearl finish similar to that found on the Joe Satriani models

This guitar is in beautiful condition, sans the chip on the headstock

V7 and V8 Humbuckers with the S1 in the middle position

Black hardware with the Ibanez Edge tremolo system

Guitar is very, very clean and 100% original

And with the Vwall Guitars world famous Pro set up,

the action on this guitar is stunning!

Comes in Ibanez Hardshell case

PRICE REDUCED TO 450.00

More if payemnt by Credit card.

Ibanez 1990 RG560

head back front full Back head

I have a very very clean Ibanez RG 560 for sale.

Matching headstock, 24 fret with the Ibanez Edge trem.

Guitar is all 100 % factory and comes in Ibanez hard shell case.

PRICE REDUCED TO 350.00

More if payemnt by Credit card.

Thanks everyone!!

Scott

RG570 Blue is gone as well!

Got the deposit today.

Please lock this one up.

Longwing, i just got in NOS Ibanez issue original

control knobs and switch tip.

I have Green, SK pink and yellow.

Guild is on hold for Jeremy pending payment.

Ibanez Maxxas is Gone!~

Hey guys, i have a scratch and dent Guild

Whitewash Made in usa D25 for sale.

Its still covered under factory warranty it just has a couple dings.

New with nice hardshell case.

New List was 1200.00

Sale price is 599.99!!

You cant beat that deal!!

For the RG 570 Blue, I will be parting this guitar out.

So here ya go:

1991 RG 570 24 fret neck.

Frets have been crowned and polished. Tons of meat

on them. 165.00 with tuners and nut.

125.00 with out hardware.

Ibanez Edge tremolo Black: 165.00 Clean!

Ibanez V1 and V2 Humbuckers: 75.00 for the pair

Ibanez S1 pick up: 20.00

Body with trem studs, pots and claw: 75.00

will need a refin as its dinged up a bit.

Thanks Guys!!

Maiden, I just PM'd you before viewing the post.

Im sorry, but I am not interested in this particular Roswell.

Best wishes.

What do you want for it?

Any trades?

Im a Jackson Dealer and can offer you most anything.

I also have a Full Custom Shop instock right now.

5A top mahagony body etc.

Please let me know.

Thanks

Scott

I spoek with the Sperzel folks at Summer Namm..

Apparantly, they sell direct to the public..

I am selling off several Guitars.

Here is the list:

1995 Ibanez RG 570 Black Pearl

1995 Ibanez RG 570 Made in Japan!

Beautiful black pearl finish similar to that found on the Joe Satriani models

This guitar is in beautiful condition, sans the chip on the headstock

V7 and V8 Humbuckers with the S1 in the middle position

Black hardware with the Ibanez Lo Pro Edge tremolo system

Guitar is very, very clean and 100% original

And with the Vwall Guitars world famous Pro set up,

the action on this guitar is stunning!

Comes in Ibanez Hardshell case

Asking 550.00 shipped in the usa

1991 Ibanez RG 570 Laser Blue?

1991 Ibanez RG 570 Made in Japan!

This model is in players condition with nix and chips here and there

The previous owner touched most of them up but its still very visible

Equipped with the sought after V1 and V2 Humbuckers

and S1 in the middle position

Black hardware with the Ibanez Edge tremolo system

I just finished doing a full recrown and polish to the frets

and they now look like new!

And of course with the Vwall Guitars world famous pro set up,

the action is stunning!

Comes in hardshell case

Asking 300.00

Ibanez 1990 RG560

head back front full Back head

I have a very very clean Ibanez RG 560 for sale.

Matching headstock, 24 fret with the Ibanez Edge trem.

Guitar is all 100 % factory and comes in Ibanez hard shell case.

Asking 385.00 shipped in the usa. more if out of country.

Ibanez RG760

SOLD

Ibanez Maxxas

SOLD

Many pics can be seen here:

http://vwallguitars.com/used_gear.html

Thanks guys!

I ordered this set of Tuners for My Jem 7VWH a couple years ago and have never used them or even taken them out of the box.

60.00 plus shipping please.

Thanks

Hey gang!

I just wanted to remind everyone that I carry

Original Floyd Rose trems and all the Ibanez Edge Trems as well as accessories for many name brands.

So whatever you need to get your progect guitar put together, I can help.

Here's whats available in trems.

Floyd Rose

The OFR

The OFR 7 string

The Floyd Rose Pro

The Speed Loader.

Prices will vary by model and color.

*Please Note*

Floyd Rose, like several other companies had a PRICE Increase last month.

It will not affect the OFR in chrome that much, but it did affect the black and gold color trems a good bit.

The Speedloaders price has not changed

Ibanez Trems

Ibanez Edge

Lo pro Edge

Lo Trs,

Edge Pro I and II

ZR Trem

Additionally, As a warranty repair center, I have dealer accounts for parts an accessories for Ibanez, Fender, Jackson, BC Rich etc etc etc..

So whether you guys need AUTHENTIC

Trem anchors or height adjustment screws,

Nuts or tuners etc.

Just let me know what you guys need.

Thanks guys!!

Hey guys!

Just a heads up about the Limited Edition

Jackson Usa SL2HT Chlorine batch

(String thru the body soloists oiled neck Emg's)

There are only about 4 of these left so whoever wants in one needs to get in contact with me soon.

These are due in November sometime and once they hit, Jackson Guitars Should have a feature on them and I dont expect them to last long after that.

Let me know if you're in!

here's a link to the Custom page at my site:

http://vwallguitars.com/jackson_ltd_customs.html

Thanks

Scott

Vwall Guitars

Hey Marcel, got your pm.

Tried to reply but your inbox was full :-)

Indeed they are correct.

The Usa Jackson's has Schallers on them and then in the late 90's somewhere

They went with all OFR.

The ironic part is that Floyd Rose is Schaller and Vice versa..

To my understanding, the OFR comes from Germany.. (I think its Germany) where that factory makes them both.

They are noth high quality trems.

As for the Jackson not being built in the Usa.. That is only re: the imports. All the Usa models are built in the Usa.

Hope its helped and great to hear from you again!

I hear ya man ;-)

well all this aside, indeed its a sweet guitar!

Cant wait for more pics...

Honestly, I not trying to 'debate' you.. but it is what it is.

Colorful, "new" definitions of the word doesnt change the etymology.

The Hebrew is Twisted and Coiled, in references to the monster.

They wouldnt speak, my leg is Leviathaned in the rope.. etc.

It was specifically used as reference in context.

Additionally, what your source calls " Earth, Air, Fire, Water, and Spirit, each bound within the circle of life, death, and rebirth etc etc...."

Is pure deception my freind..

The letters are plain and simple- HEBREW!

And they mean what they mean. not some new agy mystical meaning..

As for your search on the definition:

I dont think that the other sources you reference

are the foremost expert on Hebrew etymology....

It seems you may have omitted some of the research on that site..:

A term that has come to mean any formidable, huge or monstrous creature. The word is also associated with Satan, and identified as one of his demons, put in charge of all of the maritime regions. In some accounts the creature is credited — or blamed, to be more precise — with being the serpent who seduced Eve in the Garden of Eden.

The word 'Leviathan' in Hebrew means approximately 'that which gathers itself into folds' or 'that which is drawn out'. There is much confusion about the translation of the word in its biblical context, however it seems to refers to some huge animal, almost certainly linked with water. Some translators think the word might refer to a crocodile, others that it is a whale, or even a large ship. The Leviathan of the English poet William Blake (1757-1827) was a coiled sea serpent

Like I said, Im not trying to debate you, but I spend alot of my time researching language and history and the roots/origins of words etc and I beleive that if you would use a word such as LVTHN, it is prudent to be aware of its root definition and not just the way the contemporary world or mystical realm would like to perceive it.

--------------------

Jeremy, I love love love love love love love

this guitar you created!

I'm so pleased to see how far you've come over the years!!

Great job, bro!!!

As for the name...

Leviathon..

Actually, the Hebrew for that is

Lamed-Vav-Tet-Hey-Nun: LVTHN

Meaning, A sea monster defeated by YHWH: Yahweh..

Additionally, the Satanic Pentagram that has the symbols at each of the 5 points actual spells out exactly what i wrote above: Lamed-Vav-Tet-Hey-Nun: LVTHN

(pretty wild that they worship a defeated god)

My suggestion is to scrap that name

and roll with a different one..

Keep up the great building!!

Scott

Are you guys sure its a spring tension issue?

Yes, I agree..

This could be a possble Buzz Feiten retrofit issue???

Yeah... too obvious

I did look into that tool but I dont beleive that it widens them out

but more so cleans the slots.....

Quoted from SM site:

"Here's the latest tool developed by our repair expert Dan Erlewine, to help make refretting easier. New frets won't seat correctly until the slots are clean, and this unique saw will clean them fast!

It's 9-3/4" overall, with a wooden handle, and has two 3/8" blades. One cuts on the pull stroke, and the other on the push stroke, to loosen packed wood dust and old glue. "

LMAO!!!!!!

Well, after thinking hard about how I wanted to approach this issue, I looked in one more place where I keep special fret wire..

pulled out the digi-cal and found 1 peice that was a close enuff fit to work..

So its finally over.

Thanks for the input gents!!!

Thanks for all the input, guys!

Frank, Im gonna give some of your ideas a whirl since it is a RW board and upper registry LOL.

(Are you,in my shop hehehehe)

I'll let you guys know how it comes out.

Thanks mighty much!

Hey gang.

I thought Id ask you experts this question as I havent had to do this before.

What I have is a partial refret job on a bound neck.

The problem I have is that the fret tang is larger than the slots.

Ive taken a caliper to 2 dozen diffrent frets to try and size up a better fret/tang fit but I just dont have any..

So, I could use a little pointer on widening out the fret slots a little to accomodate the larger tang..

Thanks in advance.