blinkknot

Wow, some nice ones here. mine was a life changing experience, much more respect for guitars...

So over the weekend i wanted to play a bit on my guitar with the newly installed emgs 60/81. Started playing with the 60 and it was clear and warm as always. When i switched over to the 81 the 'volume was almost all the way down' so i turned the know up full volume and still just a faint sound was coming from the pickup when i played. turned it all the way down, still a faint sound coming from the pickup when i played... the volume knob had no effect. baffled i took it to the pros on monday. checked all the wiring and everything that could be checked. Everything was fine. by this time the 81 was completely dead. We unplugged the the 60 and plugged it into the 81 jack and it worked 100%. did the same with the 81 and plugged it into the 60's jack, once again, no sound. the 81 was dead. i just want to know if it is possible for the pickup to overheat or something, cause its still under guarantee and im getting a new one and i dont want it to happen again?

its a bit tight, but its playable. Not a HUGE problem. When you try and shred on the lower notes thats when it starts to hassle, but still, not a biggy.

At last... its done! thanks for all the great advise and help.

wow thanks for all the advice... i went with A in the end. it looks right now. i still had some veneer left which is 1mm thick so i filled the whole pocket with a piece and the ontop of that with half a piece of veneer. this gave me the right angle... i hope. ill post some pics once i bolted the neck back on. i wanted to stay away of doing anything to the finish. thats why i skipped sinking the bridge

Great stuff! Ill give it a go over the weekend, pretty sure ill get it right... i just have to

urm.... so i ran into my first big issue and im not sure how to fix it... the bridge is set at its lowest and the string is way to far from the fretboard... only thing i can think of is the neck angle? if you look at the light wood of the guitar neck that sticking out. its thinner at the bottom as it is at the end... please help!

Hey Hey, the end is near... body finished and ready for the neck. http://i205.photobucket.com/albums/bb212/b...odyspray003.jpg http://i205.photobucket.com/albums/bb212/b...odyspray004.jpg http://i205.photobucket.com/albums/bb212/b...odyspray005.jpg

Spot on. EMG 60 and 81. Another reason is that this is my first build and im planning on wiring it myself and i dont want to work in small cramped space.

Looking good. What type of bridge is that? I like the look of it. its the Hipshot Baby Grand bridge. http://www.hipshotproducts.com/cart.php?m=...etail&p=194

Made the cavity at the back over the weekend.

thats what i have in mind, my arm just gets a bit numb after 3 or so hours of sanding... hopefully this weekend ill be able to get alder to show.

Made the pickup cavities and rounded the edges.

I picked it up and i have a plan B (which i learned is a good thing to have when building a guitar) ... i really like it though and I hope that the right cut-away options will minimize restrictions.