dash

i see a scary skull dude like this

may a carve or a paintjob like it??

sorry about link, i can't figure out how to get a pic to show here!!

dude i hope you are using a NEW magnet, and not a used one!! man that would be a stinky pup!!

try here for some good info on building pickups, and there is a link on the page for magnets as well

could you use an old pickguard??

try here

use the search button!!

another thing i have found using shellac (ive only used it a couple of times), is that it is good to strain it before you use it, just so you get any undisolved flakes out of the mixture. (i learnt the hard way and had to sand the shelf unit i made back to bare timber).

i just stole a pair of my wife's stockings, cut them up and decanted it from one container to another. she wasn't amused!!

i used an alesis dm5 and roland pads when i used to play. never had a problem with either, and would recommend both products.

the only reason i sold them was to buy a motorbike, otherwise i would still have them.

i thought the track was alright, although i don't consider it metal, (i pretty much listen to slayer, slayer and slayer!!)

dunno why everyone is bagging the dude though. he may not be as fast a yngwie, and his ego (from looking at his website) may be larger than yngwie's, but i would be stoked if i could play like that!!

just my $0.02

cheers

man

tough choice this month.

i love matts but i just can't go past a les paul, so setch gets my vote

cheers

darren

yo mazz

where in australia are you??

if you are in adelaide, i'll give you a job!!

i own a fencing company, and i need someone to dig holes, mix concrete, lift heavy stuff etc.

seems every young guy i get can't take the hard work (10 hour days in 30-40 degree heat during summer) they stay for a few weeks and then leave. my poor 34 year old body is slowly breaking down!! i pay good wages, and normally end up buying lunch every day too!!

cheers

darren

how bout here or here

cheers

darren

yo duff beer man

don't feel so bad for not knowing what the difference looked like, i had no idea until this thread! (and at least you know what it stands for, i have no idea i was going to ask but thought i might get a bunch of crap and smart a$$ed answers!! )

ie:

alcoholics annonymous need jerky

cheers

darren

dude

why not use a push/pull pot?

that way if you wanted to add an extrta pot, you could have both volume controls on the one pot and a separate tone pot.

cheers

darren

don't forget the sex pistols, they sort of get halfway through it and then turn it into roadrunner from memory.

cheers

darren

if you can solder and read a schematic (or know someone who can) go here.

you can download the schematic, a circuit board diagram and also a bill of materials.

cheers

darren

definately cold pizza but substitute pepsi for coke (maybe a little bourbon in it too depending on what time you get out of bed!!)

yo,

if you're gonna experiment with mdf, PLEASE wear a dust mask.

the glue in the stuff is carcinogenic (sp?) ie: causes cancer.

dude (i use this word a lot!)

i don't have a problem with people recommending books or products etc that will help others.

i do have a problem if the book/product is written/produced by the person recommending it, and they do not state this.

i understand (from your posts) that you have no connection with this book or the profits made from it, so i don't seee it as an issue.

i merely made the point that to me it didn't seem like kyle was commenting on the painting "how to", but on the other "how to's" that he mentioned in his post.

(again, did not see the unedited version)

Well, I guess if you consider people can put on the internet how to make illegal drugs and pipe bombs without getting in trouble, you got a point!  I wish some people would know better to not follow some "How-To's"

What an assinine comparison.

The biggest problem with these types of forums is that the there are schmucks like you, offering your "free" advice at the expensive of other people ruining their instruments.

Do you REALLY want to tell me that I would be "better NOT to follow" the "how to's" explained in the book I purchased? Would you also then like to explain just how I was able to achieve the factory finish you saw in my pics? Or maybe the several testimonials shown on this authors webpage? (www.paintyourownguitar.com)

Me thinks the only "how to's" people are better off NOT following are your own.

I can see it now:

"How to Make Your Own Meth Lab and Kill Yourself with Phosphide Gas"

Appears to be spoken from someone with GREAT knowledge on the subject.

What the hell is "Phosphide Gas" anyway?

Is that what you were smoking when you posted your reply to this thread?

←

yo dino

chill out dude!

the way kyles post reads to me is that people should not follow the "how to's" he mentioned, not the painting one you are referring to.

(although i did not see his post before it was edited)

looks more like an eight string to me!!

edit damn beaten by 3 minutes!!

lovekraft,

thanks for thinking i could have an original idea!

but i really just stole this design and "scooped" out the top

maiden's all the way

plus he has great taste in music!! (up the irons)

not a fan of the strat shape, but talk about making a silk purse from a sows ear.

excellent work.

i thought that might be the case.

cheers for the info.

i love the look of the LP, but not the standard headstock.

i was thinking of using this one headstock

what do you guys think??

g'day

if you are going to veneer the headstock, do you need to route a nut slot, or can you leave a gap between the fingerboard and the veneer for the nut to sit in?