Jump to content
Voting in Guitar of the Month April 2024 is now open! ×

gibsonboy

Established Member
 View Profile  See their activity

  • Posts

    37

  • Joined

  • Last visited

 Content Type 

Everything posted by gibsonboy

  1. gibsonboy
    rear routing complete, if you are wondering what the grey line from one cavity to the other is, its where i had to bury a tube in the body for the wire to the new toggle switch position ( on the top leg of the v) this is also where the new "strat" style jack plug is going (on the side face of the top leg) . also we have decided to not have the vol and tone controls on the face of the guitar but on the side face of the bottom leg of the v. just as a matter of interests, i used a pillar drill with a router bit to do all the routing, no templates, all done by hand,,,lol
  2. gibsonboy
    anybody ever used a dremell , those thin cutting disc look good for the job, but was wondering if anyones ever used one on m.o.p or abalone, im just about to start and mop and abalone faced flying v project, alternate mop/abalone rings in a bullseye, so lots of shell blanks to cut.
  3. gibsonboy
    a couple more pics 1st one the template for cutting the mop and abalone to shape before sticking on the body, the 2nd showing the body stripped down and the tail post holes filled and the control cavity filled with wood and epoxy filler ready to be sanded down so we can have the pots rear routed .
  4. gibsonboy
    just thought id post a pic of what the donor guitar looks like before we start.
  5. gibsonboy
    I use 20 minute epoxy from super glue corp. pretty much exclusively now. Best stuff I have ever used, but hard to find. Very solid bonding and filling and colors well with sawdust. Highly recommended. cool, i will look into that, many thanks.
  6. gibsonboy
    thanks so much for all you advice, the body isnt curved, its a flying v so no problems there, what type of glue did you use on yours, i was thinking of an epoxy resin of some sorts, and some kind of epoxy filler inbetween any joints .
  7. gibsonboy
    wow,,,,,,, very much like that only the full face of the guitar with alternate rings of m.o.p and abalone about 2" wide rings, without the "sunray" effect round the outside,,,,,, thats a great pic by the way.
  8. gibsonboy
    was thinking about that, might have to shim the neck joint as it is a bolt on. at the moment the underside of the fingerboard does stand a little proud of the body already and the bridge and tail are raised up a tad as well, so hopefully by the time the finish goes on , the bridge and tail will not have to be raised up as much,,,, if at all,,,, and only a little shimming will have to be done to the neck joint, thanks for comment.
  9. gibsonboy
    having had a look at the zemaitis seeing the pieces of m.o.p cut to different shapes etc, i thought it would be the case that i too would have to cut the blanks i can get to the right size and shape, great idea with regards to the cutting out a template,,,, i will bear that in mind. and i will also look into creating some cavities under the new finish to reduce weight,,,, its not the heaviest guitar to start with, i will see what the weight of the guitar is and add the weight of the m.o.p pieces to see what the finished item may weigh then think about making any weight saving alterations. many thanks for all your suggestions. keep you posted.
  10. gibsonboy
    we will be using 1.6mm solid shell blanks to do this one,,,,,, so the guitar should weigh a bl**dy ton, lol but thanks for the info on the epoxy to fill in the gaps,,,, as i say, if we do go ahead with this we will be posting pics. its the first time ive done this sort of thing so god knows what it will turn out like,,,,
  11. gibsonboy
    something a bit like the zemaitis, but this would be a flying v with a zakk wylde bullseye design with rings in mother of pearl and abalone. http://www.zemaitis.net/zemaitis-s22st-ring-guitar-image.htm i need to know a good way to fill inbetween the m.o.p pieces , best kind of glue, etc etc.
  12. gibsonboy
    hi all, i need info on applying a mother of pearl veneer mosaic to my sons flying v. has anyone seen or done this themselves, i have seen a few guitars with this type of finish and would like any info available, many thanks., if we go ahead with this project, we will be posting pics on this site.
×
×
  • Create New...