This is my first post here. Always Im reading the forum and the web. Thank you for the information.
I have a big problem with my truss rod. Its a factory problem (@!#). When I bought the guitar it came with a defective truss rod but I did not have the experience to realize the problem. When I adjusted the truss rod I realized that the wrench not grasped the entire length of truss rod nut but I gave not importance. Until a day the truss rod nut was rolled. I thought it was my guilty. I imported new truss rod nuts and yesterday I discovered two big problems in the truss rod:
1) It was inevitable to destroy truss rod nuts because the exposed truss rod thread is crooked. For that reason I was not able to use the entire lenght of the nut of the truss rod because the wrench dont enter correctly because the limited space and the crooked situation. So, I dig the wood around the area to leave more space and then I discovered the second big problem.
2) As the truss rod thread is crooked, I cant have access to all the thread so I cant put the neck straight. Very, very bad news.
I was going to do a refret but with that problem I can't do anything. I cant put the neck straight. .
* What Truss Rod I need to specific buy for my guitar?
* When I put out the fingerboard from the neck: Can I reuse the fingerboard and glue it again or I need to buy a new one?
Thank you in advance for the help.
p.s. English is not my native language
