feylya

Did you try replacing the battery?

www.thomann.de

One thing about the Combos is that they only have one gain knob for clean and distortion. So if you like loads of distortion, you'll have a blues clean channel.

That makes it look so easy. I know programming a CNC sucks but it just chews through the wood.

Remember, post count doesn't mean anything,

Yup, guilty.

Don't forget to come back Jeremy!

Ah, for some reason I was thinking it had jacks. Now that you mention it, ohms could be a problem and since I don't know about them, I'll stop talking now.

Lemme get this right:

At present, you have 2 speakers connected to an amplifier. The connection is a jack and plug, correct?

You want to connect an additional 2 speakers, 1 left and 1 right?

I mean get cables from two of your speakers and wire them into one jack. Do the same of the other two speakers. Plug in and enjoy.

Or stick the two cables into one jack.

That'd only work if the output from the amp was in stereo. I think you can get mono adapters that have 2 outputs though.

Get a midi to usb converter.

All pots should be 25K with EMG's. The "little resistor" is a capacitor. All pots, capacitors and jacks should be included with the EMG's.

Reverse the connections on the output jack. Just a guess...

Maybe someone should invite him to join this forum

The answer is None More Black

Needs a black nut though

Good work.

Cheese cleanup in aisle 4.

Didn't like the song or the video.

Sounds like the rack set up I want.

Depends what you want I spose. After the gain but before the EQ could make sense but after the gain and EQ makes sense too.

Not always though! On my Fender, it's marked "Preamp Out" and "Poweramp in". Either way, the basic concept is the same. The fx loop is used for inserting effects at a certain stage.

An amp consists of two bits (usually) - preamp and power amp. In case people don't know:

Preamp - shapes the tone, adds distortion.

Poweramp - makes it all loud

A FX Loop inserts effects between the preamp and poweramp. Say you wanted to have delay in your sound but you wanted the delay to be the distored sound. You'd put that in the FX loop so the chain would be:

Guitar - preamp - delay - poweramp.

I'm sure there's an easier way of explaining it...

Hee, oops. It was early when I posted.

http://www.alamotrophy.com/Art/SoapBox.gif

*Edit: Would put it inline but not sure on the rules

Anyone ever hear of Switch guitars? www.switchmusic.com

One piece body and neck. I played one yesterday, dual humbuckers, 22 frets I think, Grover tuners, piezo bridge. €255 Very strange carved tops but very very nice I think. Well worth the money.

Doubt it's a magnet. Most slides are glass or brass. Ie, not ferrous, ergo non magnetic

Some nice work and a really nice site.

Or you could do what a local guitarist did and get an old square guitar case, take out the division inside it, modify the hinges so you can remove the top and you're done.