THE MAD GUITARIST

I see !! Yeah, well I'm working this whole month as i need a new 4x12" but i'll have some dough left so I'll get fully into this, i was just fidlin with the ideas. Maybe I'll build the driver in my spare time for a start. I think I'll be fully working on this in september. I supose teh bridge PU should be vired parallel to the MS-4 and controls.

I hope this is more acurate, i'm pretty sure it works, i didn't ad the sustainer controls like phase switch etc, i'm just bithered by teh main guitar wiring. I even think that while having bothe PU's on and turning the Sustainer on the sound wount cut out but only the Single gets out of the mix

Hi, yeah i had alot of work at school and such. But the sustainer was hunting me teh whole year ) The SIngle is another Pickup i run these two the output Jack is marked in the lower part and i want to use the MS-4 as the amp for the driver, that is how it's ment when turned off i could use the single but when turned on the signal from the single goes directly to the MS-4 which powers the driver.

Back again ) So this is pretty much what i thought out, i don't use teh Neck Only position, it'S basicly moded after a Les paul without tone pots and teh switch is diferent. Not sure if it'll work, leaving the cables disconected but i think it wont do nothing and with the middle volume pot muted i can use the switch as a cutter it'S basicly what i have running on my other guitar. Sorry for the mess it changed drasticly during it's making. ) Oh and the switch in the bottom right corner is a 3DPDT or what, just a ONE BIG SWITCH

HEy guys back after a long break so i'm planing to make oone of these assoon i get a suitable guitar for it, I'm thinking of using a Marshall MS-4 Guts for this, what do you think? I can't get good parts for such projects on our market so i have to go this way, I'm planing on using a strat and making it Hardtail so i'll most likly use the trem cavity for teh Amp and battery. My problem is with teh controlss what do i need to control? It has three pots, Tone, Volume and Gain. As for pickups i use only a Hubucer and a single, the hum will eb non splitable in this case, each PU's have an own Volume but i use a regular DPDT switch to ad the single in series with the hum. So i can have only B or B/N combo. For this guitar i want to put the single in the middle position and the driver in the neck. I think a four pole switch will work. I want the On/Off switch to turn on the AMP. But also i want it to switch to the Neck position, and use the midle PU for teh amp signal ONLY, is it possible? I'll post the diagrams later when i look at my other guitars carefully.

Wow thanks for the great answer you just answered all my questions . You got it just right Strat with an extremly hot humbucker. another plus is it has a giant root under the stringst nit just for each pickup lioke normal strats but a ****in swimingpool! so i'll place the whole thing there, i'ts my main guitar right now thoug so i'll make the circuit and test it externaly, and later i'll mount it in, i'll send some progress pics soon i hope

I was reading this topica long time, and i just ned to have this thingy. I have few questions. 1) i'm using a magnet as mi inner coil do i wind teh wirwes straight on the coil or do i place something betwwen it, also where to conect the cables on the coil? 2)Also if i have this thingi moded and built directly in my guitar which is a strat with an single splitable hotrail, what drivers should i use? Booster I know those are stupid aquestions but i didn't do such a thing just the booster.