scorpionscar

Hi, I'm designing some measurement tools and now I'm with the shape of the neck templates.I enclose a CAD drawing about it and be grateful if you take me a piece of advise cause I have some doudts with te measuremts expecially in the zone where de truss rod goes because I'm not sure if the wood will resist with those 4.12mm and 5.12mm thickness between the end of the rod and the end of the wood of the neck.Thanks in advance.

Scorpionscar

P.S If someone wants the plans I have no problem to share them

Hi, ¿does anyone know how to paint a zebra-style guitar like Matthias Jabs one from Scorpions in order to avoid steps in the paint betwen black zones of the print and the white ones?

scorpionscar

I've seen on the internet some videos about gluying a mapple top to a body, expecially a stratocaster or superstrato armrest zone using a vacuum system.Could someone tell about how to do that technique?

scorpionscar

Thank you so much Curtisa.Is because I like the guitar and It's possible I buy one.

Scorpionscar

¿Could someone tell me why this guitar has two switches? Thank you in advance.

scorpionscar

Thank you Swedish.I think your're right and it is possible it doesn't worth make it.Which one do you think is better in Madinter?

http://www.madinter.com/accesorios/almas/alma-gotoh-doble-accion-guitarra-electrica.html

http://www.madinter.com/accesorios/almas/guitar-gotoh-double-action-truss-rod-457-mm.html

The length is differerent too.

Juan Carlos

Hi Swedisth, I'm from Spain.I thought that it will be the worth making it by my own instead of buying it cause purchasing in the USA means to pay taxes in USA and then Here in Spain.This issue increases the prices of the truss rod in this case too much.

Juan Carlos

I post some pics about the tasks I asked:

I'm very interested in the process of making this kind of truss rod and about how to make this piece of wood and how to glue it.Thanks in advance:

Juan Carlos

The idea is to install a double action truss rod with a strait channel like gibsons and them glue the fingerboard.I would like to learn to make this type because if I buy them to USA they are too expensive and seems to be simple to fabricate on my own but I don't know how to proceed.

Juan Carlos

¿Can someone explain me how to make a truss rod like stewmac ones?

On the other hand I want to build a stratocaster but I have a doubt about a piece of different wood glued on where the truss rod nut goes.Thanks in advance:

Juan Carlos

Hi, a friend of mine has told me if I could install an active pup in his passive guitar combining both active and passive pups.The problem is that the guitar (Jackson) is one volume, one tone, 3 way switch.Is is posible to combine both pups or is not a good idea due to I think they both should be in different circuits with a tone and volume control separately for each pick up.What do you think? thank you so much in advance:

Juan Carlos

Yes acpken, I did it.I did everything like the diagram of Seymour Duncan I enclosed.I think the problema may be about the wire, I didn`t use shielding wire, and the cavities of the electronic are no shielded.I'm going to replace the wire and use shielding paint.all solders are following the diagram...

Done I entered the contestant guitar of the month!!! Thank you so much

Juan Carlos

Balaxplorer

Guitar specifications:

- Number of frets: 22

- 24.562" scale length
- ABS binding on body and neck
- Mother of pearl diamond inlays
- Bull bone nut
- Flamed maple top AAAAA
- Body and neck wood: African bubinga
- Fretboard wood: ebony
- Body-neck joint: glued on
- Electrónics: Gibson 500T (bridge) and Gibson 496R (neck)
- Tunerheads: Grover rotomatic locking system
- Tune O' matic bridge and tail piece:Tone pros
- Finish: Nitrocellulose

My Project evolution step by step from beginning to end

http://foros.guitarramania.com/viewtopic.php?f=32&t=216147

This guitar is a trubute to Matthias Jabs lead guitarrist from the scorpions and in my opinión what makes it unique is the combination of modern and agressive design in contrast with the classicism given by the beauty of the woods.

Juan Carlos

Thank you so much prostheta.What's guitar of the mounth??

scorpionscar

Yes, I've grounded it.I was afraid of the wire broke down when inserted the bridge stud, but I tested with the polimeter touching the back of any pot with one pole of the polimeter, and the bridge or any metal part with the other.It beeps and mark 0.00 Ohmnius

Hi, mi name is Juan Carlos, I'm a newbie at this fórum and I've felt free for asking my question in thisi topic because is something similar to Dalandser problema.I've built an explorer model of guitar but when I finally plugged it, I ended up with a horrible hmm noise that goes away completely when I touch strings or every metal part included strings.I point out:

-I've been testing in different equipments, amp, and amplitube on computer and the noisy is the same

-I've tested different guitars and others don't have this ground issue

-I've tested different cables

-I've tested the circuit with the digital ohmmeter and it may seem to be right

Following I enclose the diagram I've used and some pics.

In the Jack pic, the black wire goes to ground and the red one goes to tone pot and to switch

The pick ups are ceramic Gibson 496R (neck) and 500 T (Bridge)
I'm afraid I'm going insane.If someone coud help me I'd ve very grateful.Thanks for advance:

Juan Carlos