PunkE

Is there anything else one should know before removing the neck??....remove strings then unscrew???

Hey!....I'm the guy building a aluminium hollowbody... When my order from allparts fell, because they only ship once a month to sweden. I went looking for a guitar. I found a squier!!!!7 string, which is sufficient for the project I'm doing. Surprisingly it's not to shabby. Anyway... Since I'm going to do a copy of the body, I'm going to disassemble the guitar. Here's the Q? Will the neck warp if I remove it?? Wouldn't it warp when laying around???

Hey!I was wondering if the holes for attaching the neck had to be: bare with me here....have a picture of this but can't find on the net again. neck <------> body --------------------------------- O O /\ 1-1/2" \/ O < 2" > O A"?? > --------------------------------- in inches.....and what is the minimum for the A"? and the equivalent B"? for the neck?

well....tell that to the guy living in Sweden....ME!...and no...we don't have polarbears walking the streets...more like naked blonds actually... but could a sauna actually work??

tom andersson also does high quality pickups....I have a h2+ and it's mighty sweet....100 degrees?? playing guitar in the sauna??

I found some figures on the warmoth.com site....but I can't use them with the guitar i'm building...it's the aluminium body on another thread.....which is limited by it's size..... I have constant worries I tell you!!!

hey!...quick quiz! Is the distance between stop and bridge a set distance or can this be changed??

I was thinking that while playing acdc's thunderstruck....the amp sends a shock!! I heard of this before when guitar amps didn't have the shielding they have today...there are electric circuits that could help this... I'm going to insulate the following: all the knobs and electrics, the mics' and possible the bridge and stop??...which is going to get hard if I attach the bridge and stop directly to the body.... the body weight is going to be 4-4.5 kg.....compared to a steinberger of similar size and shape 3.5 kg

Hello! Maybe you could help me out here??anyhow.... I'm currently in a metal shop planning the process of building a guitar. the setup?? tune-o-matic stop and bridge...2 humbucker....4 controls...1 switch... baritone strat neck...i've done the plans in cad...pics coming soon... the trouble is I'm doing this in a CNC machine which only takes 180*280 CM pieces....small design then!!! Now to the question...phew!.... Is it possible to do the whole body in aluminum?? what shielding does one need to do?? the stop and tailpiece will be put directly onto the body...???!!!