sonrisa vertical

OK, I just put together my first frankenstrat. Bassically a used Squier body with a brand new Mighty Might neck and a Gohto Two point tremolo bridge. I have been trying to adjust the intonation according with various tutorials I gather on the web but cannot seem to get the proper intonation. I was wondering if I need to do some prep on the nut as well. The nut is the one incluided and already install with the MM neck. The action is OK, just the tunning seem wrong. When the open strings are in-tune, the freted ones aren't. And vice versa. I will greatly appreciate all your tips on the subject. Thanks Robert

Thanks to all. I will try and will let you all know how it goes. I will also save this page for future reference. Robert

Hi Guys I am having the most terrible time wiring to the back of my volume pot the grounds and all wires requier to go there. Bassically I am coming off with really whimpy conections that get loose to easyly. When placing back the pickguard with all the connections made, the space is a bit cramp and any small push end up lossing the connections. Any tips how to prep the back off the pot or which solder to use or where in the back of the pot makes the most solid connections? I did sand the back of the pot but might not enough. Thanks! Robert Justiniano