Jump to content
Voting in Guitar of the Month April 2024 is now open! ×

mammoth guitars

Established Member
 View Profile  See their activity

  • Posts

    522

  • Joined

  • Last visited

 Content Type 

Everything posted by mammoth guitars

  1. mammoth guitars
    Some of this has to do with the neck type. Warmoth makes necks with a side trust rod fine adjustment. So you cannot put the screws in much more than the standard locations. However without this issue a good rule of thumb is at least 1 inch apart in the width and 2 inches apart along the length. The trusrod channel is typcially 1/4 inch and in most cases extends nearly to the end of the neck. A standard neck plate places the screws at the outmost corners but this is not neccessary. When using neck furrules the screw locations are moved in about 1/4 inch.
  2. mammoth guitars
    I will put this in order of quality aftermarket necks from best and less... Warmoth, USACG - these guys both make high quality parts Allparts WD Mighty Mite
  3. mammoth guitars
    Does that amp use a stereo 1/4 inch jack for the footswitch? You may want to try a Cliff replacement switch
×
×
  • Create New...