David Ivy
-
Posts
189 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Everything posted by David Ivy
-
Thank you I will check my belts. And make sure the tires on the wheels are clean. What do y'all think about changing out rubber belts to the linkbelt?
-
Wow! I was hoping it might not be the motor. Maybe just the setup. It cut pine bodies pretty good but walnut is much thicker and harder. If I have to buy another motor, would it just be cheaper to buy a better bandsaw? What name brand bandsaws would do the job in say the $400 range? Thank you.
-
Wow! I was hoping it might not be the motor. Maybe just the setup. It cut pine bodies pretty good but walnut is much thicker and harder. If I have to buy another motor, would it just be cheaper to buy a better bandsaw? What name brand bandsaws would do the job in say the $400 range? Thank you.
-
Well I changed the blade but it was too wide for circular cuts. I just got another blade that is Olson 1/2 3tip but I haven't changed it yet. The bandsaw cuts slow and slowly stops all together. If I cut and back off then repeate it cuts some. I tightened the tention but it didn't cut. It will cut small pieces okay. But when I tried to cut a neck blank it just stopped as soon as the board hit the blade. Thank you for any help you can give, .David
-
I have a 14" central machinery bandsaw from harbor freight, and I am building my first full guitar Made of walnut. I just can't get it to cut throughout the 8/4 walnut. Besides changing the blade is there anything I could do to get the bandsaw to cut the material?
