Hello all!
I'm looking for help on a specific split humbucker wiring. I have experience building and modifying guitars, but I've always used a pickup diagram. I've searched on all of the common guitar wiring diagram sites and several forums, to little avail. I am converting an SSS stratocaster to HH. I would like to keep the three stratocaster pots, having a master volume, tone for the neck pickup, and tone for the bridge pickup. The pickup combinations I'm looking to wire are as follows:
1: Bridge Humbucker (In series with its own north and south coil, out of phase, a normal humbucker)
2: Outer Coils (Bridge South Out of Phase with Neck North, wired in parallel, similar to middle position of a telecaster)
3: Bridge Humbucker (Series) and Neck Humbucker (Series) (wired in parallel)
4. Neck Humbucker (in parallel with its own north and south coils, out of phase, similar to position 4 on a stratocaster)
5. Neck Humbucker (in series with its own north and south coil, out of phase, a normal humbucker)
GuitarElectronics.com has two diagrams that are very close to my ideal setup, but not quite. There's one with both the bridge parallel and neck parallel in positions 2 and 4 respectively. There's another with outer coils parallel and inner coils parallel in positions 2 and 4 respectively. However, there isn't one with outer coils parallel and neck parallel in positions 2 and 4 respectively.
I plan to use this 5 way, 24 leg super switch and the original pots that came with the strat.
If anyone has insight on how to wire this setup, I'd be very grateful.