-
Posts
182 -
Joined
-
Last visited
Content Type
Profiles
News and Information
Tutorials
Product Reviews
Supplier Listings
Articles
Guitar Of The Month
Links and Resources
Forums
Gallery
Downloads
Posts posted by rsguitar
-
-
Welcome and get ready to roll up your sleves and get busy. I think I can say that everyone here will help in any way we can, so fire away with any questions you have. Don't be afraid to try new things, because this is how we learn and progress to the next level........
Mike
-
Could even be spaulted cypress???????
Mike
-
What about trying it again with a bigger inlay? Cover up that one and use clear/amber epoxy this time
I agree you are not going to get that black out of there any other way.
Good luck my friend.
Mike
-
Very nice - cool design, and nice workmanship.
I'd like to see you bind and mitre joint that little wave on the end of the fretboard - that would look even sharper.
Yes I have thought about binding the end of the fingerboard, and I might do a test on one to see haow I like it. Thanks for the kind words............
Mike
-
Good luck to all entries everyones stuff is awsome, and I love the puzzle inlay very cool! The cool thing about the guitar I made is the fact that it is in the hands of Richie Sambora of BON JOVI. Flew to anehiem CA last Feb. to deliver the guitar. Very cool time.
Again I wish all luck...................
Mike
-
Prostheta,
Good luck .......I am sure you will do fine......
Mike
-
You could try allparts, they have two or three different twelve string bridges.
Godd luck.
Mike
-
Mike, that's great. I've never worked with purpleheart and haven't warmed up to it in the projects I've seen on this site, until now. I really like the use of it here, probably because it is integrated into maple and mahogany. Also, I find it very interesting to look at i.e. the thin laminate between the mahogany and the maple, the maple / purpleheart binding. Those details make the more "usual" neckthrough purpleheart laminates much more interesting to me. Me likey very much.
Do you mill you own pieces such as the piece between the mahogany and maple and the binding?
On the image link above, the maple in the neck under the fretboard sits proud of the body. Did you build that in when you made the neck laminates - like a step, or did you route down the neck that runs through the body?
Killer.
Yes I mill all of my own wood much better quality control that way. I buy all of my wood in bulk and mill as needed.
As for your other question I glued my sides on where I wanted them, and then routed the neck section of the body down to match the body.....
Thanks to all for the great feedback!!!!!!!!!!!!!
Mike
-
How did you make the purpleheart and maple binding that thin? I'm wondering how to do this myself to be honest, short of relying on the wood binding direct from Stewmac!
Once I have made the final shpe of the neck, and before I radious the fretboard is when I do the binding.
I use the stew mac router base and my dremel, but you can use a regular router as well. I determine how thick I want my binding to be, and then route out the required spce needed. To create th actual binding I glue up the wood that will be the binding, and in this case purpleheart and curly maple. The curly maple piece is 1/4"x3/4" and the purpleheart is 3/4"x3/4". After the glue is dry I square up th piece and the run it through my planer to get the curly maple to thickness I want. Then I cut it in half on the table saw, and glue it in place. Take care to mask off all areas you don't want glu to get on. Also make sure to leave yourself enough room to clean out the clue that will get into the fret kerf. This is very important to do, because trying to do this afterwards is not at all fun not to mention super time consuming. I learned this the hard way!!!!!!!
well this is how I do my bindings if you have any more questions on the subject feel free to send me a mesage.
Mike
-
I have some thin sheet metal that I want to use as control cavity covers. I can cut it by hand but its a pain and hard to do accurately.
I dont know what metal it is. Its about the same thickness that computer enclosures use (if thats any help).
- I seem to recall that my router can be used to cut aluminium, but I guess I'd need a special cutting bit for it...
I have templates I could use (the old cavity covers that I rejected because they are too thick)- I also have a jigsaw (but its on loan at the moment), I know that that can cut wood and plastic; could it cut metal too?
[*]Otherwise I have a hacksaw... I know it works, but it would take me forever
Whats the best way to approach this?
Thanks!
(This should make shielding easy )
Hi Ben,
you can use your jig saw in a vise so it sits upside down with the blade pointing up. You need a metal cutting blade with alot of teeth per inch. You will also need to use some type of backer for the metal so it won't jump around on you.( safety first we want you to keep all you fingers ) just draw or trace your design on the metal with the good side up. Then tack glue your piece of metal to your backer ( backer only needs to be about 1/4" ply or so ) and then turn your saw on and lock it on for hands free operation. And cut away my friend then you can clean it up with files or sander. make suee to ease the edge so you don't cut yourself on it ok!
Good luck
Mike
- I also have a jigsaw (but its on loan at the moment), I know that that can cut wood and plastic; could it cut metal too?
- I seem to recall that my router can be used to cut aluminium, but I guess I'd need a special cutting bit for it...
-
Hey man I think you have been stealing my ideas a little bit too much. Just kidding looks good heres some of my similar wood combinations.
MzI
Flamed Maple top with 1/8" purple heart layer all on top of a mahogany back.
That one has the purple heart and flamed maple neck in it which looks incredible.
Very nice stuff MzI. I would like to see more of the soloist. Thanks for the kind words.
I have been working with purpleheart wood for 20 years in various woodworking projects that I have done.
I love this wood it's great to work with not to mention it looks awsome!!!!!!!!!
As for the rest of you thanks for the great feed back on my guitar....
Here is another pic........
Mike
-
Thanks for all the great coments on my guitar when I get further along I will post some more pics.
Mike
-
I do not like the wave at the botom of the guitar BUT that alone is not enough fo me to dislike this axe
the work is really really clean and the wood combo looks wicked, I do like the wave on the fret board
Good work man
!!METAL MATT!!
Thanks matt For the coments I too love the wood combo. I have another on sold to a guy in N.J.
Mike
-
That's a mighty hot guitar you've got going there. I LOVE the way a little purpleheart stripe looks over mahagany! Ever since Soul Mate guitars's doug did that with the buckeye top I've been in love with it!
Chris
PS: Beware, they'll bi**ch about the number of pics. Should be one per post, then the rest as links or thumbnails.
Oh I thought you could put in 4 pics, but I will only put in 1 and some links from now on.
Thanks for your kind coments.
Mike
-
Here is the latest project I am working on. This is going to J. A. Allen of Vampire of Vaudville in N.Y.
fun project I love the contrast in the woods. The finish will be natural.
specs are:
5 piece curly maple and purple heart neck
purple heart fingerboard
purple heart & curly maple binding
25 1/2" scale
12" radious
mohogany body with purple heart accent,
and curly maple cap
My original body design
as far as the rest I am waiting for specs from Allen.
http://img358.imageshack.us/img358/1374/aut3747xx4.jpg
http://img121.imageshack.us/img121/6257/aut3752hz2.jpg
http://img503.imageshack.us/img503/8337/aut3740oy7.jpg
all coments welcome
Mike
Rocksmith Guitars
-
Hi all here is my first ever entry for guitar of the mounth. I hope you like it. All coments welcome. Good luck to all enrties.
Specs. are :Body
maple with 5/16" curly maple cap
Neck,
nine piece laminated with curly maple and blood wood
curly maple face on head stock
bacote fingerboard with culey maple and blood wood binding
inlay my logo in green abalone on 12th fret
stew macs jumbo fret wire
hot rod truss rod
graphite rods along truss rod
slip stone nut
standard sperzel tunner in satin chrome
25 1/2" scale
12" neck radious
Elctronics,
screemin demon pickup
volume
electosocket input jack chrome
Hardware,
gotoh TOM bridge
string through ferrules chrome
Thanks for taking a look there ar more pics at :
http://pub45.bravenet.com/photocenter/albu...amp;album=34658
Mike
Rocksmith Guitars
-
more power to you man. I bought a violin kit from stew mac for my wife. And I have a friend who is a violin builder so I can pic his brain for tips on building this thing. Iwould have made it from scratch but time is a major factor since I want it done for a christmas present....
I wish you all the best on your quest......
Mike
-
very nice looking stuff love the look of the grain.....
Mike
-
it's nice to see people thinking out side of the box when it comes finishing, hell and building too for that matter. very nice looking finish. keep up the good work.!!!!!!!!!!!!!
Mike
-
I have yet to use one but I just got one to put in a neck through that I am building. I thing that it is going to be very nice to have a little more diversity in my guitar. I didn't buy the x-control deal, I was going to do a custom wire job with it. Want to have every other string split sides, so that E,D,B are on the left and A,G,E will be on the right for a awesome stereo efect.
I think it is worth it if you want to have an acoustic sound from your electric guitar.GOOD LUCK on whatever you decide to do..
you do need to know that the radious of the bridge is 14"
Mike
-
Watco natural danish oil is a great product for this kind of thing. I am doing a Purple heart neck through that will be finished natural but i want the grain to stand out a bit more than just with lacquer.
Mike
-
Your guitar is looking great so far do you have any updated photos.....
Mike
-
No I am not some company!!! I was just wanting a list of parts needed for this thing. Stew Mac wants $355 for their neck jig. I said no way and built my own for $60 in parts. the wood I already had. Just trying to save a few $$$$$$$$$.
Mike
-
anyone have a parts list and any idea on what the hardware runs for this??????????
Mike
Nuther New Guy
in Site Feedback, Issue Reporting and Test area
Posted
Welcome aboard my friend.....
Mike