Hi everyone. I am in the process of building af tele-style guitar, using a very nice 80's Wahburn 24 fret shredder neck as a base, that I got for cheap.
The neck can be seen here:
http://www.rasmusrask.dk/guitar_dagbog/Hals.jpg
The body will be alder, with a 1/4" quilt maple cap. A digital mockup can be seen here, except that this will have a humbucker tele bridge, and a single single hum configuration:
http://www.cablesleep.dk/Rasmus/new-guitar.jpg
Debating between this color and this:
http://www.cablesleep.dk/Rasmus/new-guitar2.jpg
Gluing up the woods:
http://www.rasmusrask.dk/guitar_dagbog/limning.jpg
Glueup done:
http://www.rasmusrask.dk/guitar_dagbog/blank_back.jpg
Top shown wet:
http://www.rasmusrask.dk/guitar_dagbog/top_wet.jpg
Checking the neck with my template. The body shape is more or less a copy of a Yamaha Pacifica tele, as I find it more modern and sleek looking:
http://www.rasmusrask.dk/guitar_dagbog/body_template.jpg
Cutting out the body:
http://www.rasmusrask.dk/guitar_dagbog/body_cutting.jpg
Finished cutting the body:
http://www.rasmusrask.dk/guitar_dagbog/body_rough.jpg
Digital mockup of idea for headstock:
http://www.rasmusrask.dk/guitar_dagbog/Headstock_idea.jpg
Sanding the sides:
http://www.rasmusrask.dk/guitar_dagbog/sanding_sides.jpg
Done sanding the sides:
http://www.rasmusrask.dk/guitar_dagbog/body_side_sanded1.jpg
http://www.rasmusrask.dk/guitar_dagbog/body_side_sanded2.jpg
From the front:
http://www.rasmusrask.dk/guitar_dagbog/body_front2.jpg
Angle grinding (using sanding disc) the Jeff Miller inspired cutaway:
http://www.rasmusrask.dk/guitar_dagbog/anglegrinder.jpg
Back cutaway done:
http://www.rasmusrask.dk/guitar_dagbog/Body_cutout1.jpg
Sides of back rounded with routerbit:
http://www.rasmusrask.dk/guitar_dagbog/body_beveled1.jpg
Took the most of the neck pocket out using a forstner bit:
http://www.rasmusrask.dk/guitar_dagbog/rough_routed.jpg
Got the rest using a router freehand:
http://www.rasmusrask.dk/guitar_dagbog/neck_rout_done.jpg
Checking neck fit:
http://www.rasmusrask.dk/guitar_dagbog/neck_test_fit.jpg
http://www.rasmusrask.dk/guitar_dagbog/neck_test_fit2.jpg
Rounded off the neck heel:
http://www.rasmusrask.dk/guitar_dagbog/neck_pocket_bevel.jpg
Next: Getting bridge in place, and routing poickup cavities, plus electronics compartment. I'll try to keep you posted. Any and all comments and suggestions welcomed.
@ Ben: Sorry didn't know about that. Should be fixed now.
I did the mockup using Adobe Illustrator and Photoshop.
Best regards,
GuitaRasmus.