ok heres my question i guess before i wasn't really a question but here goes,
1) How hard is it to unbind a Fret Board (like undo it from the neck)?
2) If you take the Truss Rod out will it make a difference?
3) Are Truss Rods realitivly hard to take out?
4) What Size LED's are needed to fill the spot of a norm. size Dot Inlay?
5) If you use a 3 way swich will bi color (red/green) Leds work?
6) Does anyone no any colors of leds (i.e. a list of colors and a site to get them from)
#5 explaned,
there are leds called bi color meaning two colors in one led, there are to types of bi color led's one has three prongs and one has two prongs, the one you would probaly want to use would be two prongs the way the two prong work is/are one prong can be both - & + say u hook the + wire to the right prong and the - to the left prong your led will light up green now lets reverse that say you hooked up the - wire to the right prong and the + to the Left your led will light up red, now with that out of the way, what if you had bi color leds (Two Pronged Type) and had them hooked up to a 3 way swich with + & - wires in the middle and - on one side and + on the other do u think it would work, i'll try to make a diograh tomaro or some thing, had to reboot the comp. so i have to instal photoshop and dreamweaver and ect... agian so a diogram will be up shortly.