Voting for August 2019's Guitar Of The Month is now open!
Everything posted by coolcat
Thanks again, Greg for all your help. I'm still researching bridges, since I fear making the angle all wrong if I try to angle the neck. I may have found a bridge that works, with a low profile. Well, that's what the salesman told me anyway... Check it out and tell me what you think: http://wdmusicproducts.com/Merchant2/merch...duct_Code=BJMS1 He says this bridge was made for Bigsbys on solid body flat top guitars. George
Thanks for the info. I'm learning alot by using this forum. Actually, The guitar hasn't been finished yet, so the recessing of the bridge is an option. Of course, I'm not sure how far down to rout the recess. How would i measure this? As for the hard-tail style bridge option, the purpose of using this TOM is so I can mount a Bigsby on the guitar. Maybe there is a better bridge that is lower for this? Thanks again for all your help, guys! -George
Hey guys! My neck radius is 9.5" (It's a neck from a Squire Affinity Strat). I want to put a tunomatic bridge on it and a Bigsby trem. All the TOM seem to have a 12" radius. How do I compensate without adjusting the neck angle? Or is it that difficult to angle it? I'm a novice - this is my first guitar project. Thanks for all your help! George