thrashncrust Posted October 23, 2004 Report Share Posted October 23, 2004 i have a kramer quad rail with a super short lead, like an inch... how do i make it longer, cleanly Quote Link to comment Share on other sites More sharing options...
Saga Posted October 24, 2004 Report Share Posted October 24, 2004 Hi! Hmmm, wait for other answer before taking mine: you could simply take the wire out and put a longer one on its place, or blend the two. Hope it helps. C ya! Quote Link to comment Share on other sites More sharing options...
thrashncrust Posted October 24, 2004 Author Report Share Posted October 24, 2004 well how do i take out the wire and put in another? by the way, it has 4 wires Quote Link to comment Share on other sites More sharing options...
Saga Posted October 24, 2004 Report Share Posted October 24, 2004 Hmmm, four wires, it's a humbucker dont? Well, if you have some ability, you can (dont do it unless you're sure of what you're doing!!!) take four wires and solder each one with the four that comes from you pickup. Anything just ask. c ya! Quote Link to comment Share on other sites More sharing options...
www Posted October 24, 2004 Report Share Posted October 24, 2004 Use heat shrink tube after soldering on new (longer) wire. It will shield well and look professional. You can purchase it at most hardware stores, or electrical stores. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.