kiko Posted November 25, 2004 Report Posted November 25, 2004 Hey all, I have a Fender Strat neck here, and I need to attach Kluson tuners to it. I have the tuners here ready, but the little metal ferrules that go into the holes don't fit, they are a little too big. Can I just force them in lightly with a mallet or do I have to ream them? I was told this neck takes Klusons though! Both are genuine Fender. Quote
Mickguard Posted November 25, 2004 Report Posted November 25, 2004 Don't force it. You need to ream out the holes a little bit. There's a tool for this. A friend used a drill to do this on one of my guitars....but it was overkill. And he was just a tad off on one of the holes! Quote
PerryL Posted November 26, 2004 Report Posted November 26, 2004 (edited) If you live close to a home depot go there and get a general tools T-Handle Reamer and use it to open the holes a little. I think I spent $14.00 for it and it did the trick. Only do a little at a time though. Don't drill them out. Budget Peg Head Reamer Edited November 26, 2004 by PerryL Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.