Jump to content


Recommended Posts

I would cut out a hunk of cheap wood the size of your LP body first, and try it on that. The StewMac binding router thing will work fine, so long as you keep that bearing perpendicular to the point you're routing. Then its best to go back & measure the binding channel with calipers to make sure you've got it right, then the binding will glue in with either the binding cement or a little bit of acetone.

The LP doesn't have too many sharp curves, so its not too hard. When you get to the horn, soak some of the binding in hot water to soften it, dry it off quick, press it into the channel and hold it there while it cools. This will pre-shape the binding ready for gluing.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...