Miro Posted June 25, 2005 Report Posted June 25, 2005 hi anyone who's reading this. I'm finishing my Les Paul body and, I got a Varnish or Lacquer can (I don't know the word, damn Brazil! ) and it says that one of the composts is Polyurethane. Does it give a good finish? Quote
82DeanZ Posted June 25, 2005 Report Posted June 25, 2005 I've used polyurethane from a can with great results. It sets up very quickly. I was able to wet sand within 3 days of application. Go for it! Best Regards, Mike. Quote
unclej Posted June 26, 2005 Report Posted June 26, 2005 one little caution about poly..and i use it a lot..if you're going to sand between coats absolutely sure that you do allow 3 to 5 days between coats. if you try to do it overnight, let's say, then the previous coat will bubble, crackle and just generally mess up. read the instructions on the can..they'll usually tell you to apply additional coats withing a few minutes or let dry thoroughly. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.