Jump to content

Recommended Posts

Posted (edited)

I have some Sperzel in-line tuners and want to know if they have to be used in-line or can I do 3-per side (in other words: does a 3 per side layout have to have machine heads with graduated post heights?

Edited by bugman96
Posted

Most 3x3's don't have graduated post heights, however, you'll be turning the knob backwards(on one side) to tune it if you use inline 6's on a 3 per side headstock. Also, the gears on the backside of the headstock will go up on oneside and down on the other. I would not suggest it, but it's your guitar.

Posted
Most 3x3's don't have graduated post heights, however, you'll be turning the knob backwards(on one side) to tune it if you use inline 6's on a 3 per side headstock. Also, the gears on the backside of the headstock will go up on oneside and down on the other. I would not suggest it, but it's your guitar.

Thanks, man. I was looking the guitars in my house and kinda figured that out but thanks again!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...