keverev Posted January 13, 2006 Report Share Posted January 13, 2006 im new to wiring guitars but i know how to solder and stuff but im confused on how i should wire my 500t and 496r to a one volume one tone 3way lever switch Quote Link to comment Share on other sites More sharing options...
crafty Posted January 14, 2006 Report Share Posted January 14, 2006 Diagram You didn't say whether you're using the stock single-conductor pickups or four-conductor pickups as shown the diagram. If you're using the stock single-conductor ones, then you just solder the inner wire to the same place as the black wire in the Duncan diagram and the outer ground braid to the back of the pots, and then ground the back of the pots. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.