Rodney Posted February 5, 2006 Report Posted February 5, 2006 Has anyone used duplicolor with a poly topcoat? I'm wondering about compatability. I was considering using metalcast as a transcoat and minwax poly for a top. Quote
AlGeeEater Posted February 5, 2006 Report Posted February 5, 2006 Nope, but I wouldnt try. I'd actually pretty much never even think about it because of the top-coat under coat issue. You should never put a harder coat over a softer coat. It's a good way to get the top coat to crack, peel and chip. If I were you, I'd stick with poly through the whole process. Dupli-Color is junk compared to poly, and if you can spray it, by all means go for it!! Quote
Rodney Posted February 5, 2006 Author Report Posted February 5, 2006 Nope, but I wouldnt try. I'd actually pretty much never even think about it because of the top-coat under coat issue. You should never put a harder coat over a softer coat. It's a good way to get the top coat to crack, peel and chip. If I were you, I'd stick with poly through the whole process. Dupli-Color is junk compared to poly, and if you can spray it, by all means go for it!! Thanks for the tip. I can't spray poly right now and would be using the minwax spray can. If I could be using a 2 part and a booth, I sure as hell wouldn't be using duplicolor! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.