dayvo Posted March 23, 2006 Report Share Posted March 23, 2006 Hey guys A little while back I found a guitar manufacturers webpage where the necks were shaped by a router with a rounding over bit (quite a large one!) Have any of you been to this site? because I cant remember whose it was Any help would be appreciated dayvo Quote Link to comment Share on other sites More sharing options...
marksound Posted March 23, 2006 Report Share Posted March 23, 2006 Seems like David Myka uses that type of setup to rough his neck profiles, but I can't remember where I saw it. I could be wrong. Quote Link to comment Share on other sites More sharing options...
wwood Posted March 23, 2006 Report Share Posted March 23, 2006 Here possibly? http://www.mykaguitars.com/tools/neckcarvejig/default.htm wwood Quote Link to comment Share on other sites More sharing options...
marksound Posted March 23, 2006 Report Share Posted March 23, 2006 That would be the one. Quote Link to comment Share on other sites More sharing options...
dayvo Posted March 23, 2006 Author Report Share Posted March 23, 2006 Thanks marksound, wwood Thats the one As Ive got quite a bit of 18mm marine ply lying around, Im gunna have a go at making a jig like that myself I hope David dosent mind dayvo Quote Link to comment Share on other sites More sharing options...
Guitarfrenzy Posted March 23, 2006 Report Share Posted March 23, 2006 Thanks marksound, wwood Thats the one As Ive got quite a bit of 18mm marine ply lying around, Im gunna have a go at making a jig like that myself I hope David dosent mind dayvo I don't think Myka would have shown it if had an issue of someone using the idea, but I could be wrong. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.