shimmy Posted April 3, 2006 Report Share Posted April 3, 2006 Hi......Im probably going to get shot down here but because Im sure this has come up before but.....before that happens......I did do a seach of the forum and just could find anything too useful Im trying to find a good tutorial mabye with some plans on building a good quality uke.... Any links or suggestions of good books would be greatly appreciated.... Thanks alot Shimmy Quote Link to comment Share on other sites More sharing options...
unclej Posted April 3, 2006 Report Share Posted April 3, 2006 goodle diy ukulele and you'll find more sites than you can shake a pick at..good luck with your project. Quote Link to comment Share on other sites More sharing options...
tirapop Posted April 3, 2006 Report Share Posted April 3, 2006 http://www.rahul.net/gaa/Uke/ http://www.ukulelehut.com/build-make-an-ukulele/index.php Quote Link to comment Share on other sites More sharing options...
Setch Posted April 3, 2006 Report Share Posted April 3, 2006 Here are two from Kathy Matsushita's excellent website. One concert uke, and one tenor. http://pweb.jps.net/%7Emsmatsu/htmlpages/matuke1.html http://pweb.jps.net/~msmatsu/htmlpages/uke1.html Quote Link to comment Share on other sites More sharing options...
shimmy Posted April 4, 2006 Author Report Share Posted April 4, 2006 (edited) great theres some good info there..thanks alot.. umm also wondering......Im guessing theres 2 ways to bend the sides...one by hand and a bending iron and the other...well ive gathered that they kind of clamp them to a mdf mold the same shape as the guitar is going to be? Just wondering if anyone has any opions as to which is the easiest/best method.. Also, When bending my hand, must the sides be bent to the exact shape...I mean to the mm? or can you rely on the top to pull it into shape? Also whats is a good temperature to have ones bending iron... Sorry so many questions.....I must say something about this forum is that the people here are so helpful...I have always had fast and very helpful replys and I would like to thank everyone for that.... Thanks Shimmy Edited April 4, 2006 by shimmy Quote Link to comment Share on other sites More sharing options...
Setch Posted April 4, 2006 Report Share Posted April 4, 2006 Shimmy, the MIMF library is packed with info about side bending. I've bent some wooden binding on a hot pipe, and it's not rocket science, it's actually pretty good fun. The pipe temparature should be hot enough that water dropped on it 'dances' off - it literally 'jumps' off the pipe, rather than turning to steam. The technique you describe as 'clamping to shape' is probably a fox bender. You use a mould of the guitar sides, heated by high power light bulbs or a heat blanket, and slowly crank the wood down to shape whilst heating it. Unless you plan on making a lot of ukes of the same design, I'd use a hot pipe. You can make one from a bit of pipe and a ceramic light fitting or propane torch for very little cash, and it's good to have experience using one before going to a sidebender jig. If nothing else, you may have to 'touch up' your sides from the bender, so knowing how to use a pipe is helpful. Quote Link to comment Share on other sites More sharing options...
shimmy Posted April 4, 2006 Author Report Share Posted April 4, 2006 Great thanks alot setch... Yea i found a good idea for a bending iron on the net....Hooking up a dimmer to the lightbulb so you can change the temp.... Ill have a loook though the library for more side bending tips Thanks again Shimmy Quote Link to comment Share on other sites More sharing options...
tirapop Posted April 5, 2006 Report Share Posted April 5, 2006 http://www.billsbest.com/thsidebender.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.