Jump to content

Holy Cow Ibanez

Recommended Posts

Some type of Polyurethane/ester. Best bet with those seems to bo good quality sandpaper and a Random Orbit sander. Good luck...

Thanks. Was just thinking that myself. Good lord that clear coat takes some long to get through with sandpaper.

Link to comment
Share on other sites

I stripped a Roadstar a few years back. The "coating" was nearly 1/8" thick in some areas. I used a heat gun and a scraper first, then some circa 1850 then the usual sanding. You really have to get medievel on some of these guitars. :D

Edited by Southpa
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...