nashy Posted June 9, 2006 Report Posted June 9, 2006 I am confused with a conflict with diagrams from EMG. I have installed an 81 & 85. These were purchased separately but basically the same as the ZW set. My problem is the ZW diagram differs from the diagram packed with the separate 81 & 85. I’m using 2 volumes {independent) & two tones. In the 81/85 diagram the tone cap is soldered to the middle lug on the volume pot but in the ZW diagram it’s soldered to the out side lug. Quote
lovekraft Posted June 10, 2006 Report Posted June 10, 2006 The ZW diagram shows standard LP wiring, which does not include independent volume and tone pots - if you want them independent, wire it as per the 81/85 diagram. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.