x_possessed_x Posted July 12, 2006 Report Share Posted July 12, 2006 if i use a floyd rose i will have to recess it.was wondering if i use a kahler wich i would rather use will i have to recess it also?thanks any help is apreciated. Quote Link to comment Share on other sites More sharing options...
Batfink Posted July 12, 2006 Report Share Posted July 12, 2006 Can you be a bit more specific to model of Kahler ? Not that i'm too up on Kahler's, dare say someone more experienced will pipe in but the 2300 series and derivatives ie: the cam operated one's, only need a small amount routed but the Spyder's are like Floyd's and you need to gouge the obligatory bloody great hole for one. Jem Quote Link to comment Share on other sites More sharing options...
spazzyone Posted July 12, 2006 Report Share Posted July 12, 2006 Are you sure you have to recess the floyd? and if you had to only for up-pulls why not make a proper shim for the neck and give it the tilt it needs. i know i may get blasted for this suggetion. but why remove wood if you don't have to.as for the kahler i have seen some that were recessed but very few.it would all depend on your situation as in neck height-angle=saddle height Quote Link to comment Share on other sites More sharing options...
x_possessed_x Posted July 13, 2006 Author Report Share Posted July 13, 2006 Are you sure you have to recess the floyd? and if you had to only for up-pulls why not make a proper shim for the neck and give it the tilt it needs. i know i may get blasted for this suggetion. but why remove wood if you don't have to.as for the kahler i have seen some that were recessed but very few.it would all depend on your situation as in neck height-angle=saddle height Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.