3 Way Switch And Out Put Jack

[Off He Goes]

Okay, I figured out how to wire my pickups. But I have to wire the 3 ways toggle switch and the output jack.

There are 4 lugs on the switch, and two on the jack(strat style). On the jack, one lug is connected to a circular ring that is connected to the prong that the cable jack touches off. The the squared shaped one is not connected to the prong.

How do I wire this up properly? The Neck pickup volume pot should go from the middle lug to one of the side lugs on the switch? Same with the bridge one, just to the other side?

The lone bottom lug grounds to the back of the pot? And the center lug goes to one of the lugs of the jack?

[johnsilver]

You'll probably find something to help here.

[Tony Enamel]

Try This: http://static.zoovy.com/img/guitarelectron...-/wdu_hh3t11_01

If you're using singlecoils ignore the two wires that are soldered together on each pickup. Hope that helps.

Dezz

[Off He Goes]

Thanks!