xtjdx Posted August 10, 2006 Report Posted August 10, 2006 I tried searching on this but there are only so many queries above 4 characters for this. I just wired up an A/B box and it sounds really good, doesn't add any noise, doesn't color my tone, etc.. However, the one this it's supposed to do, it doesn't do well. When I switch channels, there is a large 'pop.' Is there any easy remedy to this? I'm using a DPDT toggle. Quote
George Brown Posted August 10, 2006 Report Posted August 10, 2006 try reading this it could also be because you are switching from high to low gain ( i think the jcm2000 marshalls had that problem) geofex is a great site for anything to do with guitar electroninics, as its liad out in iframes you wont see it all go to www.geofex.com Quote
Sambo Posted August 11, 2006 Report Posted August 11, 2006 try putting 1M resisitors from the hot to ground on all the jacks. May help a bit. If the noise is the switch there isnt alot you can do to sort it! a noisy switch is a noisy switch! Quote
xtjdx Posted August 11, 2006 Author Report Posted August 11, 2006 Bah, all I have tonight is 10K resistors. Tomorrow I'll get some 1Ms. Thanks for the article, hella useful. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.