DividedByJames Posted September 28, 2003 Report Share Posted September 28, 2003 I've got this Might Mite bass neck that is drilled for BML tuners (11/16" hole). My old neck somehow was drilled for Gotoh style (9/16" hole). Anyone ever patch up a 11/16" hole and then redrill it for a 9/16"? Are there pros and cons to this? I've been on ebay for the past few weeks trying to find a cheap set of Schaller tuners but I've been unsuccessful. I know there are really crap cheap ones, but I refuse to get those. Anyone know where I can find a Fender or Schaller set of tuners for a Jazz or P-bass for under $40? I'm itching to get my bass back online, but the tuners are holding it up. Quote Link to comment Share on other sites More sharing options...
Brian Posted September 28, 2003 Report Share Posted September 28, 2003 I've done it using Good for Wood made by Titebond, worked fine! You could also try if you don't want to drill and fill using a sleeve to fill the gap make out of pipe cut in sections. Quote Link to comment Share on other sites More sharing options...
DividedByJames Posted September 28, 2003 Author Report Share Posted September 28, 2003 Thanks Brian, I'll look into both. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.